Multifunctional Stainless Steel Base Hospital Medical Electric Operating Table (ET500)
Multifunctional Stainless Steel Base Hospital Medical Electric Operating Table (ET500)
Model
ET500

Item specifics

Material
Metal
Type
Orthopedic Bed
Certification
ISO13485, ISO9001
Condition
New

Product review

Description

Multifunctional Stainless Steel Base Hospital Medical Electric Operating Table (ET500)
Basic Info.
Size
2030*500*600-900mm
Specification
ISO9001, ISO13485 and CE
Transport Package
Carton
Origin
China
Eletric operation bed

Model: ET-500
Overall size: 2030*500*600-900
Properties:

1. The OT table consists of head, back, pelvic, leg and foot sections with electric control system for all adjustments.
2. Table top frame, column cover, base cover and side-rails are made of stainless steel which is rust proof, acid-resistant and impact resistant.
3. Table top is compatiable for C-Arm and radio translucent, fitted with full length cassette tunnel from head to pelvic section for X-ray photographing.
4. The OT table is mounted on strong castors to facilitate relocation of the table.
5. Supplied with antibacteria, soft slow recovery mattresses, thickness 6cm.
Functions introduction:

1. Length and width for tabletop: 2030*500mm
2. Elevation (up/down): 600mm-900mm
3. Trendelenburg/ reverse trendelenburg: 15° /22°
4. Lateral tilt (left/right): 15° /15°
5. Head rest (up/down): 40° /90°
6. Foot rest (up/down &horizontal positioning): 15° /90°
7. Back rest (up/down): 80° /22°
8. Waist rest up: 120mm
9. Power: -220V, 50Hz, 1.0kw