- CE, FDA, ISO13485, ISO9001
2021 New Style Obstetric and Gynecological Table
Numbers of Function
ISO9001, ISO13485, CE
Product name: Obstetric and Gynecological Table
1) Designed for use in health care facilities when doing gynecological examinations, performing various manipulations, as well as minor surgical procedures.
2) Material of main frame - steel, 1.5 mm
3) Mechanical, manual control
4) Hydraulic adjustment of height
5) Robust construction, steel must be coated with a material that allows multiple washing and disinfection
6) Back and seat sections covered with thick foam (thickness not less than 40 mm), coated with synthetic leather, allowing for regular disinfection.
7) Coating of epoxy resin or equivalent composition, resistant to disinfectants.
8) Support sections or platform with durable rubber / plastic caps to make the construction steady and non-slip
9) Backrest section with headrest
10) Designed for use in health care facilities when doing gynecological examinations, performing various manipulations, as well as minor surgical procedures.
1) Leg supports should be easily controlled in two planes, kneeboards made of durable material, with smooth edges.
2) Kneeboard fixing - joint with screw clamp
3) Two (2) leg supports with screw clamps
4) Two supports surfaces are covered with special non-slip material
1) Arm support for the purpose of intravenous infusion
2) Fixed by spring clip to the frame of the back section
3) Material - steel, 1.5 mm
4) Dense foam rubber coating allowing frequent washing and disinfection.
5) Arm support must be movable with variable angle against the base of back section
1) Rectangular in shape, made of stainless steel
2) Drawable from under the seat, sliding
3) Slides base is metal with polymeric coating
4) Fluorine plastic working pad
5) Dimensions: 160 mm (length), 80 mm (depth), 250 mm(width)
1) Load capacity: 180 kg
2) Adjustable height of the table: in the range no less than 600 mm~1100 mm
3) Backrest angle adjustment range: from 10° to 60°
4) Backrest section length: 1000 mm
5) Seat section length: 400 mm
6) Width of the backrest and seat sections: 600 mm
1) Kneeboard legs support - 2 pairs
2) Arm support - 1 pcs.
3) Waste bowl, drawable - 1 pcs.
4) Screw clamps - 1 pair